in all of it's buttery-soft goodness
Meet Patrick Lee!
Owner of Sheong Shi Tannery
Created our exclusive Midnight Blue leather
Try purchasing a bag at O My Bag without seeing the word eco staring right back at you. It’s impossible. This word is so intertwined with O My Bag, but what does it actually mean?
Early October we won the Sustainable Leather Awards, an award that is given out to an initiative or idea in the Dutch leather sector with a positive (indirect) effect on people, animals and the environment in developing countries. After winning we realized that even though the tanning techniques and the definition of eco-leather might seem obvious to us, it would be interesting for our followers to get more familiar with the details of eco-leather as well.
We’ve been working together with the Sheong Shi Tannery in Kolkata to improve, expand and promote the use of eco-leathers for 4 years now. Patrick and Veronica, the owners of the Sheong Shi Tannery are very passionate about the eco-leather project. Since the start of our collaboration in 2010 we’ve build upon and improved our eco-leathers. Our most recent development is the softer leather we use for our Midnight Collection.
At present about 30% of the leather that the Sheong Shi Tannery produce is eco, of which 60% is produced for O My Bag. Together with Patrick and Veronica we are constantly working towards promoting eco-leather and our goal is that one day the Sheong Shi Tannery will become fully dedicated to only making eco-leather.
Compared to what most people think, eco-leather does not only concern the chemicals used to make the leather, but also the environment and working conditions.
When you’re flaunting your O My Bag it is hard to believe that once your bag was a raw hide. In a corner of the tannery we find the raw hides. It is easy to differentiate our eco-hides from the other hides at this stage, as our hides look white instead of blue. The bio synthetics used to tan the eco-leather result in a semi-finished leather that looks white-tinted. That is also why our organic tanning method is also called “wet white tanning”. The off-cuts of this wet white tanned leather can be recycled or used as fertilizer, in contrast to wet blue tanning methods (chrome-hides).
As the eco-leathers aren’t treated with heavy chemicals, they can only be preserved for 6 weeks, so it can’t be held in stock by Patrick, compared to his other leathers. This is one of the reasons why the production is more difficult to manage and also why the production-time of our bags is so long, the process of just tanning the leather can take up to 8 weeks!
A common question we get at O My Bag is, how it is possible that Patrick can get a hold of cowhides in India, as it’s common knowledge that cows are sacred animals over there. The hides that are used for our bags are of cows that died of age, illness or for the Muslim community. Only few people are familiar with the fact that Islam is the second-largest religion in India. In Kolkata around 33% of the inhabitants are Muslims and eat meat. However, there are some parts of India that have recently passed a law that forbids slaughterhouses in those regions. If this law would have been passed in Kolkata, it would have a huge impact on the leather-prices, as the hides would become scarcer than they already are. As Patrick gets the hides from sources less than 100 kilometers away to minimize his carbon footprint he has not yet faced any difficulties due to these new regulations.
So what are the different stages of a tanning process? After the preparatory stages when the hide/skin is prepared for tanning by removing many of the unwanted raw skin components, the hide is ready for the tanning. Tanning is the process that converts the protein of the skin into a stable material that will not decompose and is suitable for a wide variety of end products, such as leather bags and accessories. The hides are loaded into a drum and immersed in the tanning liquor. The hides soak while the drum slowly rotates and the tanning liquor slowly infiltrates the full hide. Regular checks by the workers are necessary to see if the penetration is even. After the tanning the skin goes into the crusting phase when the hide is thinned (which is called shaving), retanned and lubricated. Most importantly, in this phase the skins are dried, softened and receive their color. The last phase of the tanning process is the finishing, where surface coating is applied. Our eco-leathers hardly have any finishing, this leaves them very open to change during use and gives them their vintage look over time. It incorporates the fat on our skins and the shine because of rubbing against our clothes.
The tanning process of eco-leather is comprised of a combination of synthetic tanning agents and natural vegetable extracts. In the making of our leathers, Patrick avoids the use of harmful chemicals like chromium, heavy metals, formaldehyde, short chain chlorinated paraffins, volatile organic compounds, alkyl phenol ethoxylates and so on. The leather is tested regularly by SGS, an independent inspection agency, to check the chemicals (not) used.
Research has shown that a significant part of the environmental impact of leather is in the manufacturing process. Therefore, it is not only the chemicals used in the tanning process that should determine how eco-friendly the leather is. To combat this, Patrick also takes care of the following areas of leather manufacturing that have a significant potential impact:
- Management of restricted substances;
- Energy consumption;
- Air emissions;
- Waste management;
- Environmental management systems;
- Water consumption;
- Control of manufacturing processes;
- Effluent treatment;
- Chrome management;
- Traceability of material.
Patrick has built a water reservoir to collect rainwater during monsoon season. This water is used later in the production. In addition to this, the used water is purified in a central purification facility.
To minimize the energy consumption, the building is made in such a way (U-shape) so that daylight can come in everywhere. Patrick and Veronica also developed the layout/machines so that one motor can give energy to more machines at a time.
Installed within the tannery of Patrick and Veronica is also a primary effluent treatment plant, which is definitely something that they are proud of. The function of this plant is to segregate the heavier suspended particles from the dissolved chemicals in the waste material that goes out of the tannery. The waste from all the tanneries is then sent to the Common Effluent Treatment Plant (CETP) where it is treated. (This process is closely and regularly monitored by the Central Pollution Control Board and the West Bengal State Pollution Control Board. Also a regular check of the Primary treatment plant within the tanneries is done by the WBSPCB and the Calcutta Leather Complex Tanners’ Association).
Last but definitely not least, is the way the workers are treated when defining eco. At the Sheong Shi Tannery they are reminded constantly that all of them together (the management, the workers and the maintenance people) are like spokes in a wheel. They are like an extended family! They all need each other and must work together for the benefit of all. Every single person is important. The Sheong Shi Tannery provides their workers with health insurance, pension funds, support in their rent and education.
In the factory, protective equipment (such as boots/gloves) is provided by Patrick and Veronica. There are emergency exits in the factory and the placing of the machines is organized so that there is no need to walk around through the factory in the case of an emergency. Light and ventilation is also taken care of.
In addition, Patrick has also taken responsibility of some of some of the workers’ children’s education. Just like us, Patrick believes that education is the best tool to eradicate poverty. The goal of the Sheong Shi Tannery is to provide education to at least one child of each worker (preferably daughters because they have less chances for education and work).
Men and women are paid equally
Rain water harvesting system installed